Description Effect
High Performance compact Radiofrequency
The New Effect® is a High-performance compact Radiofrequency equipment for body, facial and intimate treatments. It has multifrequency technology (0.6 MHz, 1.2 MHz and 2.4 MHz) with monopolar, bipolar and multipolar application. Present the innovative System Pro Performance, HTM exclusivity. Capacitive and resistive tips, MENU Info, Intelligent Programming and exclusive design.
Accessories Included
- 01 Applicator
- 01 Tripolar Facial Resistive Tip
- 01 Concentric Facial Resistive Tip
- 01 Monopolar Facial Capacitive Tip
- 03 Concentric Intimate Capacitive Tips
- 01 Octopolar Resistive Body Tip
- 01 Monopolar Body Capacitive Tip
- 01 Concentric Body Resistive Tip
- 01 Large Dispersive Plate
- 01 Cream for RF Application
- 01 Infrared Thermometer
- 01 Dispersive Cable
- 01 Applicator Support
- 01 HTM Towel
- 01 Kit Take One
- 01 Banner
- 01 Power Cable
Optional
- 01 Monopolar Facial Resistive Tip
- 01 Monopolar Resistive Body Tip
- 01 Bipolar Facial Resistive Tip
- 01 Intimate Capacitive Bipolar Tip
- 01 Metallic Rack
- 01 Fixed wrench 8 mm
Protocols
TREATMENT SUGGESTION
Reduction of Measures Protocol
1) Sanitize the region of treatment with physical Exfoliating Gel, making gentle circular massage.
2) Spray water and remove.
3) Define the treatment area into quadrants using a dermographic pencil. Perform the application in one quadrant at a time for greater control of the temperature.
4) Select on the Effect the region of treatment.
5) Check the temperature of the region of treatment using infrared thermometer before starting the application.
6) Apply the glycerin gel, which accompanies the Effect, homogeneously throughout the area of application.
7) Determine the time of maintenance of the temperature. It is recommended that the maintenance of the temperature is 3 to 5 minutes/area.
8) Select the frequency of treatment. It is recommended that the use of lower frequencies.
9) Press the Start button on the screen or in the applicator, and start the application. It should be done by quadrants and with constant movements for the distribution of energy to be homogenous throughout the duration of treatment.
10) Gradually increase the intensity as the perception of the patient, considering the therapeutic temperature desired.
11) Monitor the temperature using an infrared thermometer, increase or decrease the intensity until the reach of the therapeutic temperature.
12) Reaching a temperature of 40°C, engage the maintenance time of treatment through the Start/Timer button on the screen or on the applicator. This way, the programmed time will automatically regress.
13) Finish by applying massage cream with active lipolytic microorganisms, and perform stimulating massage.
Facial Rejuvenation Protocol
1) Sanitize the entire face with physical exfoliating soap making gentle circular massage.
2) Spray water and remove.
3) Tone with tonic lotion
4) Connect the Facial Applicator in Effect
5) Select on the Effect the region of Facial treatment.
6) Check the temperature of the region of treatment using the infrared thermometer before the beginning of the application.
7) Apply the glycerin gel, which accompanies the Effect, homogeneously throughout the area of application.
8) Determine the time of maintenance of the temperature. It is recommended to maintain the temperature of 5 minutes/area.
9) Select the frequency of treatment. It is recommended to use higher frequencies.
10) Press the Start button on the screen or in the applicator, and start the application. It should be done by regions and with constant movements so the distribution of energy is uniform for the entire duration of therapy.
11) Gradually increase the intensity as the perception of the patient, considering the therapeutic temperature desired.
12) Monitor the temperature using an infrared thermometer, increase or decrease the intensity until reaching the therapeutic temperature.
13) Reaching a temperature of 41°C, engage the maintenance time of treatment through the Start/Timer button on the screen or on the applicator. This way, the programmed time will regress and at end, the device switches off automatically.
14) Apply a Blend with DMAE and revitalizing Serum
15) At the end of the treatment apply a layer of soothing mask and wait 15 minutes.
16) Remove the mask and finish with solar protection filter.
Frequent Questions
1. How does the bifrequential And multipolar systems work?
The EFFECT provides the technology of Bifrequential radiofrequency, the frequencies available in equipment are 1.2 MHz and 2.4 MHz. The professional can select the most suitable for each treatment. Using lower frequencies, the therapeutic temperature is achieved gradually, these being indicated for the range of deeper tissues. In contrast, higher frequencies provide a “thermal shock” and are used for most superficial tissues.
In addition, the equipment has a Multipolar technology, which provides to the professional the use of applicators that can be selected according to the body or facial region – covering all regions of treatment effectively, guaranteeing security, results and comfort to the customer.
2. How does the EFFECT works ?
The goal of this treatment is to increase and maintain the tissue temperature between 38ºC and 42º, triggering the sequence of physiological reactions that cause the collagen fibers contraction and skin retraction, creating an immediate lifting effect. In long term, it stimulates the creation of a new collagen. Besides, the tissue heating provides an increase of the blood and lymphatic circulation, improving the input of nutrients and oxygen on the cells.
During the treatment, the temperature is monitored through an infrared thermometer, which can vary from 3 to 5 minutes of application by region, this way the total time varies according to the body surface area.
3. Is the visualization of the results fast?
The EFFECT offers an effective treatment and with visible results as early as the 1st session, promoting a facial lifting, and improving skin tone. As the sessions go by, there is a durable improving on the results. For the effectiveness of treatment, we recommend that all sessions that the professional indicate to your case are performed.
4. How long each session lasts?
It is recommend the undertaking the average of 4 to 6 sessions, with intervals of 7 to 15 days between each one. This may vary according to the clinical picture and evolution of each patient. Are required, at least 4 maintenance sessions with intervals stipulated by the professional.
5. How many sessions are necessary?
It is recommend the undertaking the average of 4 to 6 sessions, with intervals of 7 to 15 days between each one. This may vary according to the clinical picture and evolution of each patient. Are required, at least 4 maintenance sessions with intervals stipulated by the professional.
6. What do I feel during the treatment?
The treatment can be performed at any time of the year without changing your daily routine, it is painless and non-invasive, and provides a sense of controlled heat and redness (erythema) at the local of application, which disappear in a short time.
7. What are the EFFECT indications?
The EFFECT can also be used for treatments of scars and adherences, fibrosis, muscle contractures, fibromyalgia, among others.
8. What are the tips that come with EFFECT?
It comes with 5 tips, being they: 2 body tips- concentric and hexapolar and 3 facial – concentric bipolar, bipolar and tripolar longitudinal.
